Engine Tools

This is a torque honing plate used when honing or deglazing the bore.  The plate replicates the stress put on the cylinder block when the cylinder head is torqued into position.  It is recommended that the side case is also fitted.

Head Torque Plate

Our Price: £

Stock Available:  

Valve Seat Cutter

Used for re-cutting the valve seats.  All the top engine builders use this to ensure a good seal between the valve and the cylinder head.  Much better than lapping valves in.

Note that you will also need the Valve Seat Cutter Holder.

Valve Seat Cutter Exhaust 45 degrees

Part #07780-001-0100

Our Price: £

Stock Available:  

Valve Seat Cutter Inlet 45 degrees

Part #07780-001-0200

Our Price: £

Stock Available:  

Valve Seat Cutter Holder

Part #07780-001-0100

Our Price: £

Stock Available:  

Valve Guide Reamer

Part #07984-200-0001

Our Price: £

Stock Available:  

Clutch Removal Tool

This is a clutch removal tool specifically designed to help remove the Magnum (and similar designed) range of clutches.

Inserting the tool into the holes of the clutch shoes enables the user to hold the clutch to loosen or tighten the retaining nut.  No more sticking screwdrivers into the flywheel to stop the crank from spinning, or hitting a spanner with a hammer!

The safe and EASY way to remove clutches.

Part # clu_tool

Our Price: £

Stock Available:  

Fantastic piece to lock the piston when changing the sprocket, can be used on Rotax, 100cc & Prokart etc.

Part # eng_142

Our Price: £

Stock Available:  

• Worn piston rings,
• worn valves,
• cracks in cylinder walls, and
• blown head gaskets.

Gauges show % of cylinder leakage and cylinder pressure. Suitable for use on any petrol engine with 14 or 18mm spark plugs. Supplied in carry-case with instructions.

Leakage Tester

Part #VSE2020

Our Price: £

Stock Available:  

Includes quick coupling 150mm rigid stem with cone-type adaptor and 320mm flexible adaptor with 14 and 18mm screw in adaptors.

Supplied in blow-moulded case with instructions. 

Compression Tester

Part #CT951

Our Price: £

Stock Available:  

Supplied with steel key.

Part #VS156

Our Price: £

Stock Available:  

Fitted with 75mm, medium grade cutting stones and suitable for cylinders up to Ø175mm.

Range collar adjusts arm travel between Ø50mm and Ø100mm or Ø100mm and Ø175mm.

Adjustable spring tension gives finish control.

Part #VS162

Our Price: £

Stock Available:  

Very useful tool for removing and fitting the collets on warm engines or when using the stiffer 18lb and 26lb Valve Springs and split keepers.

Valve Spring Compressor

Part #VSPGCOMPRESS

Our Price: £

Stock Available: